V-Tec 2-wire Especificações Página 11

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 52
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 10
DIP Switches settings
Total 6 bits in the DIP switches can be configured. The switches can be modified either before or after installation.
Bit-1 and Bit 2 is for Door Station ID settings, when muti Door Stations are installed in the system, these two bit
ON(1) OFF(0)
=
=
ON
1
2 3 4 5 6
must be set correctly, the first Door Station set to 00, the second one set to 01, the third one set to 10, the fourth one
set to 11. If only one Door Station is installed, set to 00.
Bit-3: Single line button Door Station or double line button Door Station selection. If the Door Station is a double
line button, for example, the DMR11-D8, set this bit to 0, set to 1 for single line button Door Stations.
Bit-4: Button code selection; if use the default codes for each button of the Door Station, set to 0, if use the
programmed codes, set to 1.(the code for each button can be programmed by the DT CONFIG software, see the
program section in this manual)
Bit-5: Unlocking time quick selection, by default it is set to 0, for 1 second unlocking time; set to 1 for 5 seconds.
(this 5 second unlocking time can be changed by DT-CONFIG software)
Bit-6: MUST be set to off.
Bit definition Bit state Function Descriptions
Default setting, ID = 0, set to the first Door Station.
ON
1 2 3 4 5 6
ID = 1, set to the second Door Station.
ON
1 2 3 4 5 6
Bit-1 and bit-2
Door Station ID setting
ID = 2, set to the third Door Station.
ON
1 2 3 4 5 6
ID = 3, set to the fourth Door Station.
ON
1 2 3 4 5 6
Default setting for using a double line button Door Station.
Bit-3
User ID select
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
when using a single line button Door Station.
Default setting for using the default codes of the button.
Bit-4
Button line select
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
using the programmed codes of the button.
Default setting, unlocking time = 1 second.
Bit-5
Unlocking time quick select
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
Unlocking time = 5 seconds.(can be changed by software)
Working state.
Bit-6
Function reserved
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
Function reserved.
DT - System - Technical Guide 8
Vista de página 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comentários a estes Manuais

Sem comentários